MARKATOR presented a marking system from its own production for the first time at the EMO 1996. This was the proud result of high quality and performance standards of Mr. Manfred Borries and his employees.
Dot peen technology : fast, efficient marking on any material!
Dot peen marking works by electromechanically striking a carbide or diamond stylus assembly against the surface of a part to be marked. The result is a succession of dots to create digits, text, logos, and 2D data matrix codes. Each dot is the result of a pulsed current that runs through a solenoid, punches a magnet toward the surface, and subsequently returns the stylus to its starting position, awaiting the next pulse. Because each pulse occurs in only a fraction of a second, an entire 2D data matrix code, for example, can be completed in seconds (depending on the size). Frequency can be adjusted by controlling the speed of the X and Y axes movements. What makes SIC Marking’s dot peen technology so unique is the constant measurement of the electrical current between each pulse. This allows for constant, precise control of the impact consistency.
The TVS (Twin Vertical Saw) uses thin-kerf blades to efficiently remove the two vertical sides of logs up to 400mm in diameter.
The TVS is cost-effective, versatile, designed for high performance, and built strong for years of reliable service. The TVS works equally well as a stand-alone unit or integrated with an existing sawmill line.
A movable control stand holds all controls for chain feed speed, cut width, laser activation, and optional Setworks. The Setworks stores five different pre-set widths, which enable the operator to change cut sizes quickly depending on log size, reducing the need to sort logs first.
Various feed system configurations make the TVS one of the most flexible solutions for removing two sides of straight logs, curved logs, logs with a flat surface, and slabs from 0-25m per minute.
Feed Chains for round logs
– The V feed system advances logs one at a time through the TVS. Spiked hold-downs guide the log. The lug spacing can be moved to suit the standard log lengths. This is a good option for straight logs with standard lengths.
– The spiky chain feed system with heavy, spiked top-rollers adds greater stability to the log as it goes through the TVS. Logs can be loaded onto the feed chain with little or no gap between them. This option is ideal for increasing productivity with straight and curved logs. The outfeed bed has three options for slabs handling.
– Side Disks – pneumatically operated side arms that hold the side board against the log until it reaches the desired drop zone. The arms open and release the two side boards together.
– Side Rollers – spiral rollers are fitted along both sides of the outfeed bed, and as the log gets sawn the side boards fall onto the side rollers and gradually get moved outwards until they fall onto the cross transfer table.
– Economy Version – This bed has no spiral rollers or side disks, and the side boards fall directly onto a cross transfer conveyor.
Feed Chains for timber which already has a flat side
– Cant processing – For squaring up timber which already has two flat cut surfaces, a flat feed chain is available with heavy, spiked top-rollers. This is commonly used when two TVS units are used in line together.
– Slab edging – Another popular use for the TVS is for the slab recovery line. Large slabs can be put through the TVS and then fed down to a resaw or multi head resaw.
Saw logs into timber boards with the LT15START MOBILE wherever you go. Ideal solution for woodworkers looking for an affordable and mobile sawmill. The redesigned trailer allows for sawing on the bed without the need to remove the axle and trailer system. Towing is made safe thanks to upgraded and stiffer bed sections and a pin securing the head for transportation. With LT15START MOBILE produce your timber on the spot!
LX50 is the most affordable Twin Rail Sawmill from the LX family. This sawmill offers world renown Wood-Mizer build quality and cutting accuracy at a chainsaw mill price level.
Thin-kerf technology used in the LX50 is the most ecological way of cutting lumber and provides a very high yield. Using up to 1,07 mm blades requires minimal engine power to cut all types of wood. Electricity and petrol consumption is minimal.
Twin rail frame is very stable, which ensures that maximum precision of cut is acquired. Quality of cut is as high as in any other Wood-Mizer sawmill. You will be able to cut wood for your own needs as well as for sale. LX50 throat size will allow you to produce a wide variety of products – with a maximum cant with of 40cm.
Manual lubrication system and cloth pad keeps the blade, wheels and guide rollers clean from sawdust and pitch. In combination with manual blade guide arm and tension system, it eliminates any extra blade vibrations, that ensures precise cut every time.
Connecting LX50 to a sawdust extractor will make it easier to keep your place of work tidy and safer. 4” standard extraction port is compatible with majority of sawdust collection systems.
The LX50 cuts logs up to 66 cm in diameter and 3.8 m long with the standard bed. In order to cut longer logs, bed extensions can be added to extend the sawmill bed to any required cutting length. 1.53 m extensions are available to order optionally. 14hp four stroke Kohler engine is very efficient and doesn’t produce a lot of noise or fumes for work outside. 5kW 3 phase electric motor achieves it’s maximum productivity and is ideal for work in a small workshop.
The sawmill is shipped on a small pallet (160 x 65 x 100 cm). Simple to follow video and written instructions will allow you to start sawing quickly and easily.
Cutting height is adjusted by a crank.
Powerful gas engine and electric motor combined with thin-kerf bandsaw blades make cutting on LX50 easy on your back. The sawmill will cut through logs effortlessly.
LX50 is made in EU and comes with standard two years warranty.
We supply blades for soft and hardwood that will cover all your requirements. Sharpening service, spare parts and blades are available
Durometer (rubber, plastic hardness tester) represents to quantify the degree of hardness of soft materials such as rubber. Now, there is a large revision to JIS standard and ISO standard, way of details and hardness measurement of rubber hardness tester has been some changes. As a comprehensive manufacturer of soft material hardness measuring instrument, as well as rubber and plastics, we will propose the hardness measurement method of a number of soft material and elastic body.
Product Code: GS610/612/615
Measuring Stand for Durometer Hardness Tester GS series – Mechanical test stand for controlled test force from Teclock Japan.
X-02 is an automatic rubber hardness measurement system. It carried out in defined operating speed, measurements mass and pressure face dimensions by JIS K 6253 Rubber, vulcanized or thermoplastic – How to find hardness.
Automatic hardness measurement by the motor drive.
Easy operation with easy-to-read touch panel.
It allows two types of measurement of the maximum value and the timer value.
Compact integrated.
New JIS ISO-compliant.
With sensor replacement and optional weight, A, D and E can be measured by single equipment.
Galvanised hollow sections, also known as galvanised structural steel tube or galvanised hollow structural sections, is a hollow tubular section that is hot-dip galvanised with a layer of coating on the interior and exterior of the section. Galvanised hollow sections are categorized into three main types: rectangular hollow sections (RHS), square hollow sections (SHS) and circular hollow sections (CHS). Each type of hollow section has its own attributes and serves a specific purpose. Galvanised hollow sections are in both cold formed and hot finished grades, S275 and S355. Galvanised hollow sections are commonly used in a multitude of construction and mechanical applications, where they are used as frames, columns, railings and beams.
Laser cleaning is a green cleaning method. It does not need to use any chemicals and cleaning fluids. The cleaned waste is basically solid powder, small in size, easy to store, recyclable, and can easily solve the problems caused by chemical cleaning. Environmental Pollution.
The laser can be transmitted through an optical fiber, coordinated with robots and robots, to easily realize remote operation, and can clean parts that are not easily reached by traditional methods. This can ensure the safety of personnel when used in some dangerous places.
Laser cleaning can remove various types of contaminants on the surface of various materials to achieve the cleanliness that cannot be achieved by conventional cleaning. And it can also selectively clean the contaminants on the surface of the material without damaging the surface of the material.
During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions. The tigtness of belt may be automatically adjusted and controlled (the larger the resistance, the tighter the belt.) The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference of thickness of cutting-off sander piece. The rapid chuck is used to hold the working piece in place, opening or closing it is very quick, and Ø1-25mm is the same. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability low wearing rate and long life. The rapid positioning rule is in the unit of 20mm and provided with a micro rule (0mm to 25mm) of which the zeroing point is the dimensions at the rapid positioning point. The minimum of cutting length is 60mm
REFERENCE: VEC-500G ORDER CODE:1024-011 BRAND: VERTEX
We are CMM fixture supplier. Below share our two products with you, if you are interested in, welcome to contact us,
1) 98pcs CMM Fixture Kits, the base plate thickness is 25mm and the size could be customized.
2) Stand of Gauge blocks for CMM Flexible Calibration, All Direction 2D 3D Calibrating.
