Showing 81–96 of 311 results
Plumbers Hand Test Pump Hydraulic Pressure Pump
For quick and exact compression testing and leak testing on piping systems and containers in plumbing and heating installation, boiler and pressure vessel manufacture, and filling solar systems. The Rothenberger Hydrostatic Test Pump RP50 is an indispensable testing device for every installer: fill and compression test in one set up, with water or oil.
Suitable for use in construction, warehouse, manufacturing, F&B, and all industries. Low Cut, Mid Cut and High Cut. King’s Safety Shoes, Nitti Safety Shoes, D&D Safety Shoes, Krushers Safety Shoes, KPR Safety Shoes, Oliver Safety . 2-3 Days Delivery. Ready stock. Services: Insoles, Comfort Shoes , Bunion Products.
A snap gauge is a form of go/no go gauge. It is a limit gauge with permanently or temporarily fixed measurement aperture which is used to quickly verify whether an outside dimension of a part matches a preset dimension or falls within predefined tolerances.
Bowers Metrology is world renown for their bore gages and other metrology equipment. In addition to their wide range of standard three anvil systems, Bowers Metrology has a huge selection of custom bore gages available. These gages can be used to measure grooves, spline, thread, slot and more!
A steel plate is a broad and generic term for steel in the form of a plate. It is made by compressing multiple steel layers together into one to form a plate of steel. Steel Plate can be customarily cut and welded to develop a more elaborate product. Steel Plate is commonly used to strengthen foundations and uphold mass units of weight.
Applications
Structural and construction applications, pressure vessels, marine and offshore equipment, general fabrication,
transmission line towers and military applications.
Features
Lightweight and durable
Great formability and weldability
Corrosion and abrasion resistant
Excellent toughness and long service life
High tensile strength
Galvanized Steel Flat Bar, is a A36 hot rolled, mild steel bar that has been hot dipped in a zinc rich galvanizing process . Galvanized flat is a lower cost alternative to stainless steel to achieve rust free protection for up to 30 years, while maintaining comparable strength with a durable hard surface coating.
Steel Angle Bar and Steel Plate Info
Steel angle bar is a hot rolled, mild steel angle shape with inside radius corners that is ideal for all structural applications, general fabrication and repairs. Steel Angle is used in industrial maintenance, agricultural implements, transportation equipment, etc. Steel Angle is also available in a galvanized coated finish.
The steel angle sizes:
25 × 25 (1″ × 1″ × 2 mm).
40 × 40 (1.1/2″ × 1.1/2″ × 4 mm).
50 × 50 (2″ × 2″× 4 mm).
50 × 50 (2″ × 2″× 5 mm).
50 × 50 (2″ × 2″× 6 mm).
60 × 60 (2.1/4″ × 2.1/2″× 5 mm).
75 × 75 (3 × 3 × 6 mm).
80 × 80 × 6 mm.
80 × 80 × 8 mm.
We can also supply the square bar, flat bar, round bar, iron rod.
Universal beams are commonly in architecture and construction, creating columns and beam of various dimensions, grades, and specifications. Galvanised Universal Beams avoid premature rust and deterioration. It supplies benefits like lower repair & maintenance costs. The Universal beam contains two horizontal planes, known as flanges, attached by one upright component. The shape of the flanges, as well as the web, develop an ‘I’ or an ‘H’ cross-section. Universal beams can be found in a selection of section midst, flange sizes, as well as various other applications for various functions. Galvanized Universal Beams are rust-proof, have high strength, as well as offer optimal top quality for building & engineering applications.
Specifications
EN 10025 S275JR
EN 10025 S355JR/JO/J2G3
JIS G3101 SS400
Green Pin large eye hooks, grade 8 with safety latch
Material : alloy steel, grade 8
Safety factor : MBL equals 4 x WLL
Standard : generally to EN 1677-2
Finish : painted red
Certification : test certificates can be supplied upon request
Screw pin shackles (also known as a screw pin bow shackle) are designed to offer the security of a strong connection with the ease of a quick release pin. The bow shape has the ability to handle a wider variety of connections and multi-dimensional pulling, as opposed to chain shackles (also called D shackles) which have a more narrow profile and are meant to be used for straight line pulls.
A high-class load chain with a breaking strength of 1000 N/㎟ (100 kgf/㎟) is key to reliable and safe operation. The dry-type braking mechanism provides excellent performance.
Features.
Capacity
0.5 to 50 t
Standard Lift
2.5 m (0.5 to 1.5 t), 3.0 m (2 to 5 t), 3.5 m (7.5 to 50 t)
Operating Temperature
-40 to +60℃
Webbing slings are usually made from polyester, and are designed to lift heavy loads. … Webbing slings are flexible, lightweight and have a wide bearing surface, which helps protect the load you are lifting.
Wire rope made of stainless steel wire are extremely resistant to corrosion and moreover, to temperature up to 1050 C. Originally only the AISI types 304 and 302 were used for rope making but today almost all our stainless steel wire ropes are made of steel according to AISI type 316 which has better mechanical properties and higher resistance to electrolytic corrosion, which increased resistance to seawater.
A Diamond grinding wheel and CBN grinding wheel are a fairly new product. Theny have numerous shapes like flat disks, cups, cylinders, cones, and wheels with profiles cut into their periphery etc. Diamond as also CBN grinding wheels are usually classified by shape, their grit size, the concentration and bond. Clients can acording to the hardness of the cutting material to select the grit size of the abrasive for the diamond grinding wheels and CBN grinding wheel.
In general, diamond wheels are used on carbides and the CBN wheels are used on steel. They are high durability, long life and with high precise grind function. Diamond grinding wheel and CBN grinding wheel are usually used for manufacturing ceramic and metallic medical and dental products. They are also used to provide the finish ceramic automotive parts and to grind aerospace and flight control components that need super precise tolerance.
Electroplated Diamond & CBN wheels
Resinoid Diamond & CBN Wheels
Metal Bond Diamond & CBN Wheels
Vitrified Diamond & CBN Wheels
Hybrid Diamond & CBN Grinding Wheels
Professional Tools For Mold Maker
BESDIA Ceramic Fiber Stones
All New BESDIA® Ceramic Fiber Stone use the special ceramic fibers combinated with the unique bonding material and manufacturing process. Compare to the previous one we sold:
Our improvements in production processes give better tensile strength to the stones, hence fewer breakages.
A polishing efficiency increase of 10% to 20% has been achieved.
Durability under the same working conditions has been increased by 10% to 30%.
Besdia Diamond Compound & Besdia Diamond Paste
Besdia Diamond Paste and Besdia Diamond Compound are supplied in various types of packaging sizes including 5g, 10g, 20g, 50g, 100g and 1kg containers. The unique Applikator ensures that accurate amounts of diamond compound are correctly dispensed with no leakage from the syringe. Diamond paste also available for use with Metallography. Diamond Compound Applikator Sticks in Monocrystalline or Polycrystalline also available, eliminating the need for spatulas or manual application.
Manufactured to ISO 9001:2015 Quality Assurance standards.