Copper is one of the better metal conductor of electricity. It’s exceptional strength, ductility and resistance to creeping and corrosion makes it the preferred and safest conductor for building wiring. It is also the material of choice for plumbing, taps, valves and fittings as well as the ideal material used in the moulding industries.
Material Specification
JIS H3250 C1100 ( ROHS-COMPLY )
JIS H3100 C1100
JIS H3300 C1220T ( ASTM B280, ASTM B88 )
Copper Round Bar
Grade : JIS H3250 C1100 (ROHS-COMPLY) Dimension : Ø 1/8” to Ø 6” Size : 6ft to 12ft long
Copper Square Bar
Grade : JIS H3250 C1100 (ROHS-COMPLY) Dimension : 1/4” Sq to 4” Sq Size : 8ft to 12ft long
Copper Flat Bar
Grade : JIS H3250 C1100 (ROHS-COMPLY) Dimension : 3mm x 12mm to 2.1/2” x 6” Size : 12ft to 6m long
Copper Sheet, Plate
Grade : JIS H3100 C1100 Dimension : 0.5mm Thk to 1.1/2” Thk Size : 2ft x 4ft & 4ft x 8ft
Copper Tube Coil
Grade : JIS H3300 C1220T (ASTM B280) Dimension : OD 1/8″ to OD 7/8″ Dimension : OD 4mm to OD 15mm Size : 15m Coil
Copper Tube Straight
Grade : JIS H3300 C1220T (ASTM B88) Dimension : OD 1/4″ to OD 3” Dimension : OD 6mm to OD 20mm Size : 6m long
Stavax ESR is the most renowned of the ASSAB plastic mould steels. As the core product in the Stainless Concept series it is characterised as a through hardening corrosion resistant mould steel with excellent polishability. Stavax ESR is electro slag remelted in order to further reduce the number of inclusions in the steel.
Stavax ESR is a premium stainless mould steel for small and medium inserts and cores. Stavax ESR combines corrosion and wear resistance with excellent polishability, good machinability and stability in hardening. Mould maintenance requirement is reduced by assuring that core and cavity surfaces retain their original finish over extended operating periods. When compared with non stainless mould steel, Stavax ESR offers lower production costs by
maintaining rust free cooling channels, assuring consistent cooling and cycle time. This classic stainless tool steel is the right choice when rust in production is unacceptable and where requirements for good hygiene are high, as within
the medical industry, optical industry and for other high quality transparent parts.
WHO WE ARE: We are excavator spare parts professional supplier.
WHAT WE DO: Our supply chain cover Engine parts, Hydraulic parts, final drive and swing gear parts, undercarriage parts, GET attachment parts, air conditioning parts, quick wear parts. We have been serving either in domestic market or overseas market, over 2 years’ experience in excavator parts area enable us to have firm cooperation and partnership with many overseas customers.
WHOM WE SERVICE: Construction Company, Excavator parts wholesaler, Excavator parts dealer, Government, Personal.
Customer satisfaction and optimal machine performance are what ANTO Parts strive for by providing large storage of spare parts, reliable service and readily available stock. Approximately 95% of all most well known brands(CAT Komatsu Hitachi Volvo Hyundai Doosan Kobelco Kato Sumitomo JCB, SANY, XCMG, LONGKING, and so on) of excavator parts are continuously in stock.
ALL PRODUCTS
Excavator Spare Parts
Excavator Final Drive
Excavator Swing Gear
Excavator Engine Parts
Excavator Travel Motor
Excavator Hydraulic Pump
Excavator Hydraulic Cylinder
Excavator Undercarriage Parts
Bulldozer Spare Parts
Construction Machinery Parts
CAT Excavator Parts
Hitachi Excavator Parts
Komatsu Excavator Parts
Excavator Monitor
Excavator Controller
Shaping machine is a machine designed for giving desired shapes to the surfaces that may be horizontal, vertical and flat. A shaping tool is used to cut in curves, different angles, and many other shapes. The cutting tool is used to give the shape to the hard surface of metal or wood by removing the excess material.
We are a heavy equipment parts supplier of used, reconditioned, and new heavy equipment parts. With over 2000 dismantled salvage parts machines in our yard and access to the largest heavy equipment parts locater we’re confident we can supply you with the right parts for your machine.
Taper designs may be specified by an included angle and an angularity tolerance; or the slope may be defined as “Basic” and a “form or contour” tolerance applied to the profile. In either case a datum controlling the size of the taper must be located at some point on the taper. Referred to as a “Reference or Datum diameter”, this dimension relates the taper to some feature on the workpiece, such as an adjacent shoulder or a theoretical sharp corner at one end of the taper.
F.P. TOOL stands for Fine Precision TOOL. It was established in 1932 began with adjustable reamer. F.P. TOOL became one of the leading manufacture of reamers today. One of our series, “MIU series” which size range 0.300 to 12.100mm in 0.001mm increment. Tolerance is set between Omm and 0.001mm, suitable for Uitra’Precision Reaming.
Solid Carbide reamer Japanese brand FP TOOL for general works/suitable for deep hole cutting
Hunger Adjustable Reamers have carbon steel replaceable blades and are good general purpose tools suitable for tool rooms and workshop use. They will produce a clean accurate hole with adjustable size control. For use by hand with suitable wrench. Size is obtained by progressive light cuts approx. 0.001 – 0.05mm per pass.
At Endecotts every single test sieve is individually manufactured under the most stringent quality control procedures using only the finest materials. We use the most advanced computer scanning techniques to ensure precise test sieve apertures. Our skill and experience ensures you will not only receive a test sieve that looks and feels good, but one that offers a degree of accuracy second to none.
TONE TTC-500 TORQUE WRENCH CHECKER
Check at anytime the actual torque value before using torque wrench in the field. Visible LED Display prevents mistake in reading the torque value.
3 measurement mode are installed (Peek mode/Track mode/Peek hold mode) Available for various size and head of the wrench by using Adaptors.
The magnetic drilling machines, annular core cutters and plate beveling machines by BDS Maschinen GmbH are completely manufactured
in Germany and trusted by metal working professionals worldwide. With the introduction of the new generation of magnetic drilling machines,
BDS sets a new benchmark in metal core drilling technology.
GH started out in 1958, as a manufacturer of lifting components. Manufacture of hoists, cranes and crane components, although in its manufacturing range can find, gantry cranes, cantilever cranes, jib cranes, transfer carts, boat hoists, rubber type gantries. Our years of experience and our customers’ recognition of the high quality of our products have placed GH among the leading European manufacturers in the lifting sector.
Established in 1938, Kemet International Limited is at the forefront of precision lapping and polishing technology, using Diamond Compound and Diamond Slurry, which are manufactured in house to ISO 9001:2015 quality standards. Kemet International’s Contract Lapping Department has the capability to provide solutions to most Precision Lapping and Polishing applications.
Our process Laboratories are fully equipped with the latest range of Lapping Machines, Polishing Machines, Ultrasonic Cleaners, Mould Polishing and Metallographic & Geological thin sectioning Equipment to carry out tests on customers’ samples. In addition, our team of industrial chemists are able to manufacture bespoke diamond lapping and diamond polishing compounds and diamond suspensions.
Our customers have consistently relied on Rexnord’s efficiency, knowledge and experience to deliver top quality products for their toughest applications. Our brands are used by customers worldwide who have already benefited from Rexnord’s dedication to providing exceptional service and specialty solutions. Power Transmission brand products are highly-engineered mechanical components used within complex systems where reliability requirements and the cost of failure and downtime are extremely high.
