A micrometer, sometimes known as a micrometer screw gauge, is a device incorporating a calibrated screw widely used for precise measurement of components in mechanical engineering and machining as well as most mechanical trades, along with other metrological instruments such as dial, vernier, and digital calipers. Micrometers are usually, but not always, in the form of calipers (opposing ends joined by a frame). The spindle is a very accurately machined screw and the object to be measured is placed between the spindle and the anvil. The spindle is moved by turning the ratchet knob or thimble until the object to be measured is lightly touched by both the spindle and the anvil.
A coordinate measuring machine (CMM) is a device that measures the geometry of physical objects by sensing discrete points on the surface of the object with a probe. Various types of probes are used in CMMs, including mechanical, optical, laser, and white light. Depending on the machine, the probe position may be manually controlled by an operator or it may be computer controlled. CMMs typically specify a probe’s position in terms of its displacement from a reference position in a three-dimensional Cartesian coordinate system (i.e., with XYZ axes). In addition to moving the probe along the X, Y, and Z axes, many machines also allow the probe angle to be controlled to allow measurement of surfaces that would otherwise be unreachable.
STM7-BSW is a measurement support software for measuring microscopes.
Not only is a live image acquired by digital camera and displayed on a monitor, but also observation, measurements and report creation are possible on the same screen. Therefore, the STM7-BSW improves your work efficienc
Spline have invested heavily in manufacturing equipment, processes and people and continue to do so, this gives us the ability to respond quickly and effectively to suit any of our customers demands. We have also adopted lean manufacturing techniques which eliminate waste and compress production times making Spline competitive in the market.
Our professionalism and knowledge base ensures our quality standards exceed customer expectations. With the use of our fully equipped UKAS laboratory, our team of technicians deliver the highest standards. Quality controls at each stage of manufacture are carefully monitored through our production process through to final inspection, ensuring that every aspect is delivered to precision.
Relative measuring instruments which can measure dimensions of various workpices like machine parts by using air flow is called Air Micrometer.
It comes in Flow type and Back Pressure type mainly.
Air Micrometer is supported by our many years of precision gauge manufacturing techniques, and it is of highly appraised for its reliability and precision, making it of great value in quality control and increased efficiency in a world-wide industrial world.
Four basic models- the Column Model(flow type), dial model(back pressure type),Digital Model(back pressure type)- can be used not only to measure dimensions, but also for complicated profile measuring automatic measuring, automatic sorting and etc., making them practical over a wide variety of uses. The measuring head can be standardized according to measuring factors and also by order-made designs to meet various measuring requirement.
Limit Plug Gauge isa cylindrical bar (plug gauge) with highly finished ends of different diameters is used. If the hole size is correct within tolerable limits, the small end (marked “go”) will enter the hole, while the large end (“not go”) will not.
Thread Gauge System is a go-no gauge refers to an inspection tool used to check a work piece against its allowed tolerances. Its name is derived from two tests: the check involves the work piece having to pass one test (go) and fail the other (no-go).
Surface platecast iron is a solid, flat plate used as the main horizontal reference plane for precision inspection, marking out (layout), and tooling setup.
Surface plategranite is a solid, flat plate used as the main horizontal reference plane for precision inspection, marking out (layout), and tooling setup.
