We are focused on creating values for our customers by providing our diverse range of high quality products. Our customers have access to the very best Connect and Control plumbing solutions from world-class manufacturers like MELCO, XPress and TORO 25, as well as top-notch fire fighting equipment from SRI.
Leveraging on our international resources, paired with our extensive industry knowledge and technical expertise, RFT Marketing remains at the forefront of innovative plumbing solutions. Integrating with high quality tools from REMS and Novopress for pipe working, our customers can be assured of optimal installation solutions that maximize the efficiency and quality of their projects.
Our proactive approach to customer relations enables our customers to receive expert advice at every stage of their project, adding unrivalled value through our close collaboration. This allows us to fulfil their existing needs, as well as understand and meet their future requirements. Work with us, and see why we have earned our customers’ trust as their first choice supplier.
Titanium is well known for its properties of lightness, strength, and high-corrosion-resistance, but it is not so well known that there are other propertiess and what they are really capable of. Titanium is a ‘new’ metal that was discovered in 1790 and started to be produced industrially in 1948 after a long period of matuaration since its discovery. Because of its bountiful reserves and excellent bio-friendliness, titanium is a material friendly to the environment and humans. Through research and development this material has revealed neally infinite possibilities one after another.
Material TItanium Batam, Material Titanium Indonesia, Material Titanium, Titanium Material, Titanium Pipe, Titanium Plate, Titanium Flange, Titanium Rod, Titanium Bar.
Galvanised hollow sections, also known as galvanised structural steel tube or galvanised hollow structural sections, is a hollow tubular section that is hot-dip galvanised with a layer of coating on the interior and exterior of the section. Galvanised hollow sections are categorized into three main types: rectangular hollow sections (RHS), square hollow sections (SHS) and circular hollow sections (CHS). Each type of hollow section has its own attributes and serves a specific purpose. Galvanised hollow sections are in both cold formed and hot finished grades, S275 and S355. Galvanised hollow sections are commonly used in a multitude of construction and mechanical applications, where they are used as frames, columns, railings and beams.
A steel plate is a broad and generic term for steel in the form of a plate. It is made by compressing multiple steel layers together into one to form a plate of steel. Steel Plate can be customarily cut and welded to develop a more elaborate product. Steel Plate is commonly used to strengthen foundations and uphold mass units of weight.
Applications
Structural and construction applications, pressure vessels, marine and offshore equipment, general fabrication,
transmission line towers and military applications.
Features
Lightweight and durable
Great formability and weldability
Corrosion and abrasion resistant
Excellent toughness and long service life
High tensile strength
Galvanized Steel Flat Bar, is a A36 hot rolled, mild steel bar that has been hot dipped in a zinc rich galvanizing process. Galvanized flat is a lower cost alternative to stainless steel to achieve rust free protection for up to 30 years, while maintaining comparable strength with a durable hard surface coating.
Steel angle bar is a hot rolled, mild steel angle shape with inside radius corners that is ideal for all structural applications, general fabrication and repairs. Steel Angle is used in industrial maintenance, agricultural implements, transportation equipment, etc. Steel Angle is also available in a galvanized coated finish.
The steel angle sizes:
25 × 25 (1″ × 1″ × 2 mm).
40 × 40 (1.1/2″ × 1.1/2″ × 4 mm).
50 × 50 (2″ × 2″× 4 mm).
50 × 50 (2″ × 2″× 5 mm).
50 × 50 (2″ × 2″× 6 mm).
60 × 60 (2.1/4″ × 2.1/2″× 5 mm).
75 × 75 (3 × 3 × 6 mm).
80 × 80 × 6 mm.
80 × 80 × 8 mm.
We can also supply the square bar, flat bar, round bar, iron rod.
Universal beams are commonly in architecture and construction, creating columns and beam of various dimensions, grades, and specifications. Galvanised Universal Beams avoid premature rust and deterioration. It supplies benefits like lower repair & maintenance costs. The Universal beam contains two horizontal planes, known as flanges, attached by one upright component. The shape of the flanges, as well as the web, develop an ‘I’ or an ‘H’ cross-section. Universal beams can be found in a selection of section midst, flange sizes, as well as various other applications for various functions. Galvanized Universal Beams are rust-proof, have high strength, as well as offer optimal top quality for building & engineering applications.
Specifications
EN 10025 S275JR
EN 10025 S355JR/JO/J2G3
JIS G3101 SS400
Wire rope made of stainless steel wire are extremely resistant to corrosion and moreover, to temperature up to 1050 C. Originally only the AISI types 304 and 302 were used for rope making but today almost all our stainless steel wire ropes are made of steel according to AISI type 316 which has better mechanical properties and higher resistance to electrolytic corrosion, which increased resistance to seawater.
We offer the highest quality wire you can buy for a significantly lower retail price than many other companies selling EDM wire. Our EDM wire is guaranteed to be clean and made of nothing but the best materials for your EDM needs. Saving you money, while keeping your machines running is important to you, therefore, it is important to us.
We will not sell you bad brass wire or junk wire with other minerals mixed into the brass, which can cause serious issues with cutting speed and wire breakage. Therefore, we offer the best of both hard brass EDM wire and stratified EDM wire for all your wire EDM needs.
Just choose your weight, your diameter, and the tensile strength of your wire. If you do not see what you need or you just have some general questions please give us a call.
If you do not know the correct size for your EDM wire, you can always download our size chart in order to figure out which spool size you can use.
Copper tube is used to EDM holes in all materials. Copper tube gives better results against carbides than brass tube. When EDM drilling through very hard materials such as Carbide, Tungsten, diamond, copper electrode tube widely used.
We are specialized in 4 main categories of EDM Tubing: Brass Electrodes Tube, Copper Electrodes Tube, Single Hole Tubing, Multi-Channel Tubing. This EDM electrode tube is the single hole brass tube for small hole popping drilling EDM.
PT Metro Rekayasa Indonesia is the biggest & professional supplier of bolt & nut, which specialized in steel construction & industrial project.
We are also the authorized distributor of the biggest manufacturer of bolt & nut in Indonesia. The capacity of production is about 3000 ton/month consisting of all kind bolt & nut , especially high tensile bolt & nut with condition standard coating (black finish) or special coating of electroplating , hot dip galvanized, cadmium plating, fluorocarbon coating .
Our product has been consumed by many prestigious projects in Indonesia & also exported to many counties, such as: USA, Europe, Singapore, Germany and others. Our aim is to deliver best quality bolt & nut with best price & service to any project of yours.
Our production machining capabilities include milling, drilling, tapping, flattening, turning, slotting, bending, notching and more.
We support business segments : Heavy Equipment / Construction, Mining, Agriculture, Transportation, Petro, Alternative Energy, Automotive, Fabrication Oil & Gas, Manufacturing, Electronics, Etc.
In the field of construction applications, the surface processing of stainless steel is important for many reasons. The corrosive environment requires a smooth surface because the surface is smooth and not easy to accumulate. The deposit of dirt can cause stainless steel to rust and even cause corrosion.
In a spacious hall, stainless steel is the most commonly used material for elevator decorative panels. Although the fingerprints on the surface can be wiped off, it affects the appearance, so it is best to choose a suitable surface to prevent fingerprints from being left.
Sanitary conditions are very important to many industries, such as food processing, catering, brewing, and chemicals. In these applications, the surface must be easy to clean every day, and chemical cleaning agents are often used.
Stainless steel is the best material in this regard. In public places, the surface of stainless steel is often scribbled. However, an important feature of it is that they can be washed away. This is a significant feature of stainless steel over aluminum. It is easy to leave marks on the surface of aluminum, which is often difficult to remove. When cleaning the surface of stainless steel, you should follow the lines of stainless steel, because some of the lines processed on the surface are unidirectional.
Stainless steel is most suitable for hospitals or other areas where sanitary conditions are critical, such as food processing, catering, brewing and chemical engineering. This is not only because it is easy to clean every day, and sometimes chemical cleaning agents are used, but also because it is not easy to breed bacteria . Tests show that the performance in this respect is the same as glass and ceramics.
Derlin ( POM )
Derlin has excellent rigidity, impact toughness, abrasion resistance and solvent resistance. It also has a appearance, hydrolytic stability fatigue endurance. It has a low coefficient of friction and hence makes it ideally used as bearings, gears and conveyor belt limits. It is also used in electric kettles, chemical pumps, pulley wheels etc.
Cast Iron Characteristics
Cast iron or grey iron has a relatively high carbon content. It is hard, brittle, nonmalleable and more fusible than steel. Suitable in application demanding the ability to withstand high pressure without leaking.
Typically used in gears, v-pulleys, clutch drums, hydraulic pistons, support bearings, control valves, etc.
Material Specification ( Grey Iron 4E, UB250 )
American standard : ASTM A.48 CLASSES 35-40
National standard : EN 1561 GJL-250
British standard : BS 1452 Gr260
German standard : DIN 1691 GG25
Japanese standard : JIS FC 25
Bronze Characteristics
Lead gunmetal bronze offer excellent machinability, excellent wear resistance at normal lubrication, high resistance to seizure and good corrosion resistance. It is commonly used in marine sectors.
Typically used in pressure tight requirements, bearings, valve bodies, pump bodies, etc.
Material Specification
British standard : BS 1400 LG2
Japanese standard : JIS H5121 CAC406C ( BC 6 )
American standard : ASTM SAE 40
Australian standard : C83600
