Galvanised hollow sections, also known as galvanised structural steel tube or galvanised hollow structural sections, is a hollow tubular section that is hot-dip galvanised with a layer of coating on the interior and exterior of the section. Galvanised hollow sections are categorized into three main types: rectangular hollow sections (RHS), square hollow sections (SHS) and circular hollow sections (CHS). Each type of hollow section has its own attributes and serves a specific purpose. Galvanised hollow sections are in both cold formed and hot finished grades, S275 and S355. Galvanised hollow sections are commonly used in a multitude of construction and mechanical applications, where they are used as frames, columns, railings and beams.
Laser cleaning is a green cleaning method. It does not need to use any chemicals and cleaning fluids. The cleaned waste is basically solid powder, small in size, easy to store, recyclable, and can easily solve the problems caused by chemical cleaning. Environmental Pollution.
The laser can be transmitted through an optical fiber, coordinated with robots and robots, to easily realize remote operation, and can clean parts that are not easily reached by traditional methods. This can ensure the safety of personnel when used in some dangerous places.
Laser cleaning can remove various types of contaminants on the surface of various materials to achieve the cleanliness that cannot be achieved by conventional cleaning. And it can also selectively clean the contaminants on the surface of the material without damaging the surface of the material.
During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions. The tigtness of belt may be automatically adjusted and controlled (the larger the resistance, the tighter the belt.) The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference of thickness of cutting-off sander piece. The rapid chuck is used to hold the working piece in place, opening or closing it is very quick, and Ø1-25mm is the same. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability low wearing rate and long life. The rapid positioning rule is in the unit of 20mm and provided with a micro rule (0mm to 25mm) of which the zeroing point is the dimensions at the rapid positioning point. The minimum of cutting length is 60mm
REFERENCE: VEC-500G ORDER CODE:1024-011 BRAND: VERTEX
For quick and exact compression testing and leak testing on piping systems and containers in plumbing and heating installation, boiler and pressure vessel manufacture, and filling solar systems. The Rothenberger Hydrostatic Test Pump RP50 is an indispensable testing device for every installer: fill and compression test in one set up, with water or oil.
A snap gauge is a form of go/no go gauge. It is a limit gauge with permanently or temporarily fixed measurement aperture which is used to quickly verify whether an outside dimension of a part matches a preset dimension or falls within predefined tolerances.
Bowers Metrology is world renown for their bore gages and other metrology equipment. In addition to their wide range of standard three anvil systems, Bowers Metrology has a huge selection of custom bore gages available. These gages can be used to measure grooves, spline, thread, slot and more!
A steel plate is a broad and generic term for steel in the form of a plate. It is made by compressing multiple steel layers together into one to form a plate of steel. Steel Plate can be customarily cut and welded to develop a more elaborate product. Steel Plate is commonly used to strengthen foundations and uphold mass units of weight.
Applications
Structural and construction applications, pressure vessels, marine and offshore equipment, general fabrication,
transmission line towers and military applications.
Features
Lightweight and durable
Great formability and weldability
Corrosion and abrasion resistant
Excellent toughness and long service life
High tensile strength
Galvanized Steel Flat Bar, is a A36 hot rolled, mild steel bar that has been hot dipped in a zinc rich galvanizing process. Galvanized flat is a lower cost alternative to stainless steel to achieve rust free protection for up to 30 years, while maintaining comparable strength with a durable hard surface coating.
Steel angle bar is a hot rolled, mild steel angle shape with inside radius corners that is ideal for all structural applications, general fabrication and repairs. Steel Angle is used in industrial maintenance, agricultural implements, transportation equipment, etc. Steel Angle is also available in a galvanized coated finish.
The steel angle sizes:
25 × 25 (1″ × 1″ × 2 mm).
40 × 40 (1.1/2″ × 1.1/2″ × 4 mm).
50 × 50 (2″ × 2″× 4 mm).
50 × 50 (2″ × 2″× 5 mm).
50 × 50 (2″ × 2″× 6 mm).
60 × 60 (2.1/4″ × 2.1/2″× 5 mm).
75 × 75 (3 × 3 × 6 mm).
80 × 80 × 6 mm.
80 × 80 × 8 mm.
We can also supply the square bar, flat bar, round bar, iron rod.
Universal beams are commonly in architecture and construction, creating columns and beam of various dimensions, grades, and specifications. Galvanised Universal Beams avoid premature rust and deterioration. It supplies benefits like lower repair & maintenance costs. The Universal beam contains two horizontal planes, known as flanges, attached by one upright component. The shape of the flanges, as well as the web, develop an ‘I’ or an ‘H’ cross-section. Universal beams can be found in a selection of section midst, flange sizes, as well as various other applications for various functions. Galvanized Universal Beams are rust-proof, have high strength, as well as offer optimal top quality for building & engineering applications.
Specifications
EN 10025 S275JR
EN 10025 S355JR/JO/J2G3
JIS G3101 SS400
Screw pin shackles (also known as a screw pin bow shackle) are designed to offer the security of a strong connection with the ease of a quick release pin. The bow shape has the ability to handle a wider variety of connections and multi-dimensional pulling, as opposed to chain shackles (also called D shackles) which have a more narrow profile and are meant to be used for straight line pulls.
A high-class load chain with a breaking strength of 1000 N/㎟ (100 kgf/㎟) is key to reliable and safe operation. The dry-type braking mechanism provides excellent performance.
Features.
Capacity
0.5 to 50 t
Standard Lift
2.5 m (0.5 to 1.5 t), 3.0 m (2 to 5 t), 3.5 m (7.5 to 50 t)
Webbing slings are usually made from polyester, and are designed to lift heavy loads. … Webbing slings are flexible, lightweight and have a wide bearing surface, which helps protect the load you are lifting.
