KYOWA TEST PUMP

Description

FEATURES

Achievement of high pressures 50,300,500,1000kg/cm2 by simple mechanism and operation
Easy-to-carry handy type
Ligthweight and rust-free plastic tank, with dust-proof cover
With direct-coupled type ball tap available for city water suppy, …easy to feed water
Pressure gauge with 100φ large vibration absorber
The closing valve is of special construction of Kyowa original design.
T-50N is designed for large sustion/discharge rate and light-weight, having the capacity several times the conventinal model
T-50N is simply connected with a 1.5m high pressure hose with one-touch coupler.

■SPECIFICATIONS

	Max pressure Mpa	Plunger dia.	Stroke mm	Suction rate/stroke c.c.	Tank volum l	Discharge nozzle size	Weight kg	Size L×H×W	Accessories
T-50NDX	5	30	45	32.0	18	3/8	8.0	610×375×290	Hose ass’y with coupler 3/8k×1.5m
T-300NDX	30	12	45	5.0	18	3/8	8.0	610×375×290	Hose ass’y 3/8k×1m
T-500NDX	50	8	30	1.5	18	3/8	9.5	630×410×270	Hose ass’yr 3/8k×1m
T-1000NDX	100	8	30	1.5	18	3/5	9.5	630×410×270	Hose ass’yr 3/8k×1m

■N-Series CONSTRUCTION

T-50N shown, Configuration differs slightly for T-300N, T-500N and T-1000N.
Please be sure to speeify model when you contact us.

No.	Part name
1	Cylinder
2	O-ring P-30
3	Plunger
4	Snap ring
5	Snap ring Suction valve ball 3/8
6	O-ring P-18
7	Suction nipple
8	Suction pipe
9	Strainer fitting
10	Strainer
11	Suction valve chamber
12	Suction valve ball 3/8
13	Suction valve spring
14	O-ring P-11
15	Suction port elbow 1/4
16	Valve joint 1/4
17-1	Valve ass’y
17-2	Stop valve substance
17-3	Valve ball
17-4	O-ring P-7
17-5	Back up ring
17-6	Valve ball hold
17-7	Cap
17-8	Stop valve shaft
17-9	Valve handle A
18	Nipple 1/4
19	Gauge stand
20	Excluding pressure valve ball 3/6
21-1	Push nut
21-2	Excluding pressure valve shaft fitting
21	Excluding pressure valve shaft
22	Valve handle B
24	Plug
25	Flat washer

No.	Part name
26	Bolt
27	Pressure gauge joint 3/8
28	Pressure gauge j100 φ×35ｋ
29	Nipple 3/8
30	Anti-pressure hose
31	Bolt
32	Flat washer
33-1	Support
34-1	Support pin φ12×45
35-1	Flat washer
35-2	Speed nut
37-1	Support pin φ12×40
41-1	Handle
42	Grip
43	Tank（water tank)
44	Ball tap ass’y
45	Suction coupling
46	Pump stand
47	Small screw
48	Flat washer
49	Nut
50	Tank cover
51	Hanging fitting
52	Smal screw
53	Flat washer
54	Dangle belt
55	Handle belt
56	Small screw
57	Flat washer
58	Nut
59	Main name plate
60	Equipment name plate
61	Manyal name plate
62	Model name plate

■TESTER INSTALLATION

■TESTING PROCEDURE

(1) Connest valves C,D to the test pipe.

(2) Connect to the valve D with a connecting hose.

(3) Feed water into the test pipe from this tester tank or the city water service line, through the vlve D, while purging out the air from valve C.(Feef water till the pipe gets full.)

(4) Replenish water into the water tank and then open valves A,B. Thereafter, reciprocate vertically the handle(B) till water begins to come out from the valve B after complete purge-out of the air from the pump. When the water vegan to come out, close the valve B tightly.

(5) Open the valve D and feed water from the tester till water begins to flow out from the valvw C, subsequent to purge-out of the air. When water began to flow out, close the valve C tightly.

(6) When the specified pressure is reached, close the valve A tightly.

　　●At this time, pressure is reached, close the valve A tightly.

　　　Reversely, no-drop of pressure will show that the test pipe passes the pressure test.

(7) After the test, release the applied pressure through the valve B.

　　●When continuous water feed is required, connect the ball tap to city water service line.

“KYOWA “JET CLEANER KYC-20A

New and Striking Pumps for Cleaning Applications from KYOWA!

“KYOWA” JET CLEANER KYC-20A with Unique Pumping Mechanism(Pat.Pendeing)

They are Compact, Super Lightweight, and Unbeatable in Pumping Performance.

■KYOWA JET CLEANPAK

■　Oil-less construction (no lubrication oil grease required) need no maintenance.

■　High-pressure outpt comes from efficiency-oriented “no monsense” design.

■　Differential operation (one suction and two dischargers per cycle) keeps the discharge fluctuations very low.

■　Close-coupled construction eliminates problems normally associated with the motor drive, such as belt slipping.

■　Design that fully utilizes rolling frictions (utility model and design registration being applied for) keeps the starting torque to minium and provides maxmum output.

■　Simple and rugged construction permits easy disassembly, cleaning, and re-assembly.

■　Compact and super-lightweight structure makes it handy and protabale.

■　Newly developed universal nozzle permits almost every washing job with ease.

■SPECIFICATIONS

Type.	Dimensions in mm, L×H×W	Weight in kg	Pump			Electric Motor
Type.	Dimensions in mm, L×H×W	Weight in kg	Pressure in kg/cm2	Discharge in l/min	Revolutions per minute	Type**	Output in W
CLEANPAK. KYC-20A	250×210×230	9	40(PSI 560)	2.9/3.5	1430/1740	Single-phase, 50/60Hz	250